Sun-microsystems 2.0 Uživatelský manuál stáhnout pdf (Strana 15)

PreparingforInstallation 1-3

1.2.1 OpenBoot PROM Release 2.26 Required

Your system OpenBoot PROM must be release 2.26 or later if you are installing

the SunFastEthernet Adapter in SPARCserver 1000/1000E or SPARCcenter

2000/2000E systems. Release 2.26 is required on all installed system boards.

If any installed system board PROM is earlier than 2.26, you must replace its

PROM before installing the SunFastEthernet Adapter in your system.

Note – If your OpenBoot PROM is not 2.26 or later, attempting to reboot the

system with the reboot , sync ➤ sync ➤ halt and init 0 commands will

cause a system reset and the following error will occur.

DeterminetheOpenBootPROMRelease of YourSystemMasterBoard

♦ Use the .version command to check your system OpenBoot PROM

release:

♦ Contact your local service provider for an upgrade kit if your

SPARCserver 1000/1000E or SPARCcenter 2000/2000E OpenBoot PROM

release is earlier than 2.26.

OA>. TEST FAILED - System Reconfiguration .........

OA>Swap to SBI Interrupt Status register caused trap

ok .version

Release 2.26 Version 1203 created 96/04/19 09:44:48

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Žádné komentáře

Sun-microsystems 2.0 Uživatelský manuál Strana 15