Sun-microsystems StorEdge 6900 Series Uživatelský manuál stáhnout pdf (Strana 119)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 103

For Internal Use Only

T1/T2 Notification Events

The example below shows a typical port failure event

FIGURE 8-1 Storage Service Processor Event

Site : Lab 3286 - DSQA1 Broomfield

Source : diag.xxxxx.xxx.com

Severity : Error (Actionable)

Category : Switch

DeviceId : switch:100000c0dd00b682

EventType: StateChangeEvent.M.port.8

EventTime: 01/30/2002 11:17:22

’port.8’ in SWITCH diag209-sw2a (ip=192.168.0.32) is now Not-Available

(status-state changed from ’Online’ to ’Offline’):

INFORMATION:

A port on the switch has logged out of the fabric and gone offline

PROBABLE-CAUSE:

1. Verify cables, GBICs and connections along Fibre Channel path

2. Check Storage Automated Diagnostic Environment SAN Topology GUI to

identify failing segment of the data path

3. Verify correct FC switch configuration

----------------------------------------------------------------------

Site : Lab 3286 - DSQA1 Broomfield

Source : diag.xxxxx.xxx.com

Severity : Warning

Category : Switch

DeviceId : switch:100000c0dd00b682

EventType: LogEvent.MessageLog

EventTime: 01/30/2002 11:17:22

Change in Port Statistics on switch diag209-sw2a (ip=192.168.0.32):

Port-8: Received 9746 ’InvalidTxWds’ in 0 mins (value=9805 )

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 161 162

Žádné komentáře

Sun-microsystems StorEdge 6900 Series Uživatelský manuál Strana 119