Sun-microsystems SunSwift SPARCcenter 2000 Uživatelský manuál stáhnout pdf (Strana 19)

InstallingtheAdapter 2-3

2.3 BootingtheSystem

Refer to the Solaris 2.5 Handbook for SMCC Peripherals manual for detailed

instructions for the following tasks.

• To boot the system from the default boot device, use the boot -r command.

• To use the SunSwift SBus Adapter Ethernet interface as the boot device,

specify the OpenBoot™ device name with the boot command, for example:

Note – A“SUNW,hme0: Link Down - cable problem?” message means that the

Ethernet cable is disconnected either at the RJ-45 connector or at the hub.

ok boot -r /iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@0,8c00000

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Žádné komentáře

Sun-microsystems SunSwift SPARCcenter 2000 Uživatelský manuál Strana 19