Sun-microsystems SunFastEthernet Adapte Uživatelský manuál stáhnout pdf (Strana 67)

C-1

RunningDiagnostics

Note – The SunFast Ethernet Adapter is not supported in Sundiag for Solaris

1.x.

The tests available for this device consist of a selftest and SunDiag.

C.1 Selftest

The SunFastEthernet selftest is a test that verifies correct operation of the SBus

card. The selftest consists of a suite of tests that reside in the FCcode PROM on

the card. The code is written in Forth programming language and can only be

run under OBP version 2.3 or later.

The SunFastEthernet Selftest does not automatically run after power on or

reset, but can be invoked by the user as necessary to acquire status of the

hardware.

As a Sun SPARCstation machine is powered up, the following banner will

appear. Check that the PROM version is 2.3 or later. If the system is set up to

automatically boot, press key combination L1-A to stop it. If the system is not

already at the ok prompt, select n for the new command mode to get to the ok

prompt.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

Žádné komentáře

Sun-microsystems SunFastEthernet Adapte Uživatelský manuál Strana 67