Sun-microsystems 1.0 Uživatelský manuál stáhnout pdf (Strana 28)

2 SunFDDI/P1.0AdapterUser’sGuide—May1997

• Provides connection to multimode fiber (SunFDDI/P and SunFDDI/P Dual)

networks

• Supports data transfer rates of up to 100 Mbps

• Provides power-up self test and system diagnostic tests

• Provides high reliability and availability through distributed, automatic

recovery (DAS adapter only)

• Supports up to four SunFDDI/P PCI cards installed in one PCI bus and up

to eight SunFDDI/P PCI cards installed in one machine

• Conforms to the 32-bit Peripheral Component Interconnect (PCI)

specification for short form adapter cards

• Supports 33 MHz operating frequency and 5.0 volt I/O signaling

• Supports 62.5/125 micrometer, multimode fiber (MMF)

• Provides SunNet Manager™ agents for the effective management of FDDI

stations and networks from a centralized SunNet Manager console; (requires

SunNet Manager 2.2 or later in addition to SunFDDI/P)

• Complies with the ANSI X3T9.5 standard for single-attached LAN fiber

rings and with revision 7.3 of the ANSI/FDDI SMT specification

FDDIConformance

SunFDDI/P conforms to the following standards and specifications:

• ANSI/FDDI Media Access Control (MAC) X.3.139-1987

• ANSI/FDDI physical sublayer (PHY) X3.148-1988

• ANSI/FDDI physical medium dependent (PMD) X3.166-1990

• ANSI/FDDI Station Management (SMT) X3.299 R7.3 (formally R7.2.99)

• PCI Spec. Rev 2.1 (Part Number 802-2387-02)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 181 182

Žádné komentáře

Sun-microsystems 1.0 Uživatelský manuál Strana 28