Sun-microsystems 1.0 Uživatelský manuál Strana 83

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 182
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 82
FDDINetworkArchitecture 57
6
Dual-AttachedStation(DAS)
A dual-attached station (DAS) is attached to the FDDI network through two
connectors called the A-port and the B-port, respectively. The A-port has a
primary input (Pin) and a secondary output (Sout); the B-port has a primary
output (Pout) and a secondary input (Sin).
The primary input/output is attached to the primary ring and the secondary
input/output is attached to the secondary ring. The flow of data during
normal operation is shown in Figure 6-5.
To complete the ring, you must ensure that the B-port of an upstream station is
always connected to the A-port of a downstream station. For this reason, most
FDDI DAS connectors are keyed to prevent connections between two ports of
the same type.
Figure 6-5 Dual-Attached Station (DAS)
Dual-attached station
(DAS)
Pin
Pout
Data from upstream station
Data to downstream station
MAC
PHY B
PHY A
Sin
Data from downstream station
Sout
Data to upstream station
B-port
A-port
Zobrazit stránku 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 181 182

Komentáře k této Příručce

Žádné komentáře