Sun-microsystems 1.0 Uživatelský manuál stáhnout pdf (Strana 38)

12 SunFDDI/P1.0 AdapterUser’sGuide—May1997

InstallationRequirements

• Hardware and Software Platforms

SunFDDI/P is designed for Sun-4u PCI-based system architectures (32

Mbytes RAM minimum) running a Solaris 2.5.1 Hardware: 4/97

environment.

• Disk Space

A machine with 1600 KBytes of disk space is required to install SunFDDI/P.

• Host names and IP Addresses

A unique host name and IP address must be assigned to each SunFDDI/P

device installed in your machine. If you are installing more than one

interface in a single machine, each interface must be connected to a different

subnet of a network.

DeclaringIPAddressesforSunFDDI/P

You must assign a unique IP address to each SunFDDI/P interface. If you have

more than one networking interface installed on your machine—either

multiple SunFDDI/P interfaces or some other LAN interface (for example, an

Ethernet interface)—each interface must be connected to a different subnet.

Before installing the SunFDDI/P software, update the files on your NIS/NIS+

server to assign IP addresses and host names for the SunFDDI/P interfaces

that you are going to configure. If you are not using a name service, update the

/etc/hosts file on each machine in the network to add the IP addresses and

host names of the stations attached to the FDDI ring.

The installation script updates the /etc/hosts file on the local machine and

enters the IP addresses and host names assigned to the SunFDDI/P interfaces

in which it is installed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 181 182

Žádné komentáře

Sun-microsystems 1.0 Uživatelský manuál Strana 38